qupada

There’s this range of Philips signage displays in up to 32" (~$1800 USD): https://www.ppds.com/display-solutions/digital-signage/philips-tableaux

They even run Android, so should be able to install the Home Assistant app natively. Being intended as a signage solution, there’s also PoE (although it is 45W 802.3bt class5), and even room for four 18650 batteries.

Notably though, they use the newer E-Ink “Spectra” (16 bit, 65,536 colour) panel which offers its full 2560x1600 resolution in both greyscale and colour, not the “Kaleido” one (12 bit, 4096 colour) of this Boox monitor that only has half of its 3200x1800 resolution in colour (Boox recommend using 1400x1050).

I don’t know which of the two panels offers better refresh rates, however.

They’ve missed a couple of times over the years.

From LTO 1 to 9, the capacities (TB) were 0.1, 0.2, 0.4, 0.8, 1.5, 2.5, 6, 12, 18. LTO 6 also rather let the side down there.

Apparently though LTO 10 is going to get things back on track? I’ve seen claims it will achieve 36TB, but I’ll believe it when I see it.

The real problem is the environmental requirements for LTO 9 and newer have become too strict. The longevity is still (supposedly) fine, but the tapes are much more sensitive to temperature and humidity fluctuations when in use.

Brand new tapes have to be brought into the environment where they’ll be written for 36-48 hours to acclimatise before being used, and then have a 60-90 minute “calibration” in the drive before they can be written to.

Honestly, it could put the use of the newer types of tapes entirely out of the reach of many.

Assuming you’re not talking about this article’s 7.68TB drive and not the mentioned 61.44TB one, actually far less than you’d think.

Solidigm’s equivalent (https://www.solidigm.com/products/data-center/d7/ps1010.html) goes for between $1000 and $1500 USD for the same 7.68TB capacity: https://www.serversupply.com/SSD/NVMe/7.68TB/SOLIDIGM/SB5PH27X076T001_394195.htm

(And performs similarly, 14.5GB/s R / 10GB/s W, vs 14.6/11 for the one in the article).

Reticulated gas is charged by the kWh here in New Zealand. The meter may well be calibrated in m³ (I don’t have gas at home, so I don’t know for sure) but all pricing is energy, not volume.

For bonus points, if instead you buy your gas in cylinders - a pair of 45kg (~100lb) cylinders is a common installation for houses without piped gas - those are sold simply by the unit. The best conversion for that I can find is one energy retailer describing one 45kg cylinder as 2200MJ (611kWh).

I expect this is one of those things that is overall horribly inconsistent depending on where you live.

Comparing the amount of noise my laptop’s CPU fans make between the two of them when doing moderately intensive tasks like screen sharing a 4K display, Zoom is measurably worse.

Possibly the one time that Microsoft’s inexplicable inability to make their own software run well on their own OS has somehow not manifested.

Don’t get me wrong, it is still death-by-a-thousand-cuts terrible, but the most current iteration of Teams is not the worst in its field… at this one specific thing.

Even for devices that will stand the test of time on their own, they’re still being unnecessarily modified by the addition of extra nonsense to support AI boondoggles.

I was talking to our company’s account manager from one major PC manufacturer, he agreed that a generation of laptops with a likely-to-be-useless-in-future Copilot button permanently emblazoned on their keyboard will really date this era.

The computers themselves will be fine - they have some extraneous hardware but that doesn’t really detract from their usability - but there’s a better than even chance that logo will exist as a reminder long after memories of what it was supposedly for begin to fade.

You might have to consider buying used.

Even older HP printers are fine (and I know people love to shit on them, but they too used to be perfectly safe and reasonable choices). More or less the safe/unsafe divide coincides with the switch from printers with 2x16 character displays to ones with full colour screens.

I’ve got a 2012-designed (but mine is 2017-built) HP Colour Laserjet CP5225dn, it has none of the modern lock-in shenanigans.

Just gotta find one that’s new enough that consumables are still readily available (fortunately this usually isn’t too difficult), and in good physical condition.

It always seemed like an amazing way to speed-run repetitive strain injury to me.

Anything that requires that level of precision but offers basically zero range of motion just seems to force unnatural levels of tension in every muscle in your hand and wrist.

The things cause me agonising wrist pain within minutes of use, not something I’ve experienced with any modern (ie, larger than the postage stamp sizes of old) touchpad.

Good riddance.

The website also shows a large unpopulated section of PCB near the network jack with “PoE” silkscreened:

https://assets.raspberrypi.com/static/3f5c4569bdef13d9e0bcfce8d5e2d780/00863/disassembled.webp

PoE built in could make this a very interesting device indeed.

Generally, you just need to export the pool with zpool export zfspool1, then import again with zpool import -d /dev/disk/by-id zfspool1.

I believe it should stick after that.

Whether that will apply in its current degrated state I couldn’t say.

While I have a personal general rule against backing electronics on Kickstarter and would likely wait for it to be available at retail, I wouldn’t necessarily immediately discount this one.

It’s probably worth noting - mentioned in Jeff Geerling’s video - they had a MOQ of 1500 on the metal case, which likely forced them to be significantly further through the process than a lot of Kickstarters are at launch.

Indeed, you will note that they carefully chose the moniker “Daily Active Uniques” and not “Daily Active Users”.

I think that speaks volumes, as humans are definitely harder to retain.

It sounds like you’re thinking of LoRa, another 900MHz radio protocol.

LoRa has similar bandwidth to Zigbee (125kbps), and as you say is designed for low-power devices running on battery. I have PIR motion sensors at home which have used only around a third of their battery after 2 years.

Security cameras seems to be a large target market for HaLow though, where you need a couple of megabits at a few hundred metres.