What’s your max volumetric flow? Have you tried printing with a really low max volumetric flow (e.g., 4mm³/s)?
I’ve had very misleading results with the max volumetric flow test, and I wonder if your printer may be struggling to push the filement through at your max speed.
Orca can show you the flow rate of each layer, which varies throughout the print due to the min layer time. I’m curious if you may find more failures at certain flow rates.
I love Grist!
My wife and I were frequent Google Sheet users and since a few years ago we started using Grist a lot. We tried some other alternatives before, but none of them felt even close to right for us.
I’m not particularly worried about those vulnerabilities. Unfortunately, they are pretty common AFAIK, but at-least they pretty much only open a backdoor within whatever network you’re connected to, and can be mitigated with a VPN.
IMO, there’s much bigger reasons to be worried about RedNote than security or even privacy.
My wife and I have also returned to Valheim during the holidays 😂
We didn’t get far on our first playthrough, we barely got past the swamp, but this time we’re about to get to the mistlands!