Hi!

I’ve already posted in the Arch Linux community on lemmy.ml but I’m also posting it here for additional visibility. I’d cross-post it but I don’t think PieFed has that option yet. Hopefully it’s okay.

Anyway, a few hours ago today, when I turned on my computer, went to the systemd-boot boot loader, chose “Arch Linux” from the list of boot entries, I was faced with a system that is stuck at boot as seen from the image I uploaded.

So far, I’ve tried disabling Overdrive by editing the kernel parameters at boot, and by booting an Arch Linux live ISO to no avail. As in, I’m stuck at the same stage of the booting process, even when using the aforementioned live ISO. Which means I can’t really boot into the system.

This happened before, like, a few months ago. I either booted with a live ISO and executed mkinitcpio -P, or just did a hard reset, as I waited for a kernel, GPU drivers or mesa update. About a month ago, it stopped happening and the system booted fine. I don’t really know what fixed it, sorry. Until today, that is.

I’m at a loss of what to do aside from either reinstalling Arch Linux or installing a different distro. I really don’t want to do that, though, as I haven’t really done any backups of my config files, and I’m generally happy with how I’ve set up my system. The fact that the live ISO didn’t work also made me think of a hardware problem, namely the GPU, which complicates things even more, as I don’t have a spare one.

Some information about my hardware:

  • GPU: Radeon RX Vega 56
  • Motherboard: ASUS Prime X470-Pro
  • CPU: AMD Ryzen 7 2700X

I ran # pacman -Syu last night so everything is up to date. Not sure how relevant this is but I’m using the radeon open-source drivers.

Hopefully all of this was somewhat clear and if there’s something I missed, please let me know.

Thanks in advance!

EDIT: Changed the GPU to a different PCIe slot and everything’s working fine so far. I’m not celebrating just yet because when this first happened a few months ago, I’d hard reset the PC and everything would work fine. But if I shut it down and let it pass like 12 hours before I’d power it on again, the problem would reappear. So I’m just basically waiting for tomorrow now.

  • mvirts@lemmy.world
    51·
    1 day ago

    Pretty sus :P

    I would start by removing the graphics card if you have integrated graphics available (or disable the PCI port in your bios)

    This reminds me of the kinds of issues I would get when setting up overclocking and getting just past the limit of stable operation. If you have overclocking set up definitely try disabling it.

    If removing the GPU does nothing don’t forget to check removing each ram stick separately, or make sure your bios runs a full memory check.